Welcome to Qingdao Sanhuan Colorchem Co.,Ltd.

HJ-348 is one-component, oxime cure,neutral RTV silicone sealant.With good adhesion to most common construction substrates.It is mainly designed for various doors and windows installation, sealing and glass assembly.


1.An easily applied, one-component, neutral, fast curing.                                         

2.Good adhesion to most common construction substrates.  

Multi-purpose joint filling and bonding, special for:                                         

1.Various doors and windows installation, and glass assembly.                                                      

2.Indoor decoration seal.                                           

3.A variety of other non-structural adhesive seal.

1.The construction environment is well ventilated.                                         

2.Remove the old fill, remove any loose material, clean and dry the surface.                                                      

3.Paste on both sides of the construction surface with protection tape.                                           

4.Cut the nozzle according to the size required.

5.Load the cartridge into caulking gun,fill the gap with the sealant at 45 degree angle.

6.Use a single-edged razor blade to remove excessive solidified sealant.And finished in10 minutes.

If you contact with uncured product, please wash with water and seek medical care immediately.Non-toxic after curing.                                         

Packing:Inner packing:280ml,300ml/pc                                         

Outer packing:24pcs/carton

Storage:12 months from manufacture date when store in cool dry locations below 27℃, keep away from heat source and direct sunlight during storage. 


Items DataTest Method

Reaction Type

Cure TypeRTV
ComponentOne component
AppearanceSmooth paste without bubble or particles
ColorTranslucence,white,black,aluminum and other colors on request
Specific Gravity g/ml0.95~0.97(GB/T13477.2-2002)
Folw,Sag or Slump0(GB/T13477.6-2002)
Extrusion  (ml/min)≥80(Φ4mm,0.2MPa)
Skinning time (Minutes)4≤10(GB/T13477.5-2002)
Curing time (hours) φ 6mm≤72
As Cured – after 7~21 days at 23°C± 2°C, 50% relative humidity
Hardness Shore A (Cured)15~25(GB/T531-1999)
Tensile strength (Mpa)≥0.3(GLUE STRIP Method)
Elongation at break%≥200(GLUE STRIP Method)
Base material application Temperature4℃-40℃(GB/T13477.7-2002)
Optimum construction temperature15℃-27℃
Anti-mildewcoule be as request 

As apply at 23°C± 2°C and R.H50% conditions

Q:How long is your delivery time?
A: Around 20 days after confirmed and received the deposit according to different conditions.


Q:Do you provide samples? Is it free or extra?
A: Yes, we would provide free samples if you could pay for the freight charge.


Q: How could you guarantee your shipment quality?
A: We are very confident in our products and we pack them very well, so usually you will receive your order in good condition, any quality question, we will deal with it immediately.


Q:How to contact if encounter problem?
A:Please send Email to sales@cnhanjoin.com. Your inquiries will be replied in time, high attention and excellent service also could be provided.


Q:What is the advantage of your products?
A:Our products have the best quality and reasonable price.


Q:What is the terms of payment?
A:Normally, T/T30% deposit first, balance before delivery by T/T.

Q: Could you provide OEM service?
A: Yes, we could.

1 - 4 of 5

Inquire Now

If you have any questions, feedback or comments, please fill in the form below and we will reply you as soon as possible.